Make adorable Mario and Luigi amigurumi together with matching pipes and mushrooms. This pattern gives you step-by-step rounds, assembly tips and bonus mushroom designs so you can create a complete scene. Perfect for crafters who love character amigurumi and small detailed work. Follow the clear rounds and helpful photos to bring these little plumbers to life.
Progress Tracker
0% Complete
— Sealing Method :
Info :
I often use this method to get rid of some tails because it saves more time than weaving the tails in one by one. However, make sure the area that you want to "seal" is not visible, thus, not making it ugly. 1. Hold the tail to your piece. If you have more than 1 tail, you can twist it to become one. 2. Apply a small amount of hot glue gun, quickly and carefully press it using a metal flat object, I'm using my scissors. 3. Cut off the tail and you're done.
— Mario Pattern :
HEAD :
(beige) R1: 6sc in magic ring [6]
Round 3 :
R3: (inc, sc) x6 [18]
Round 4 :
R4: (inc, 2sc) x6 [24]
Round 5 :
R5: (inc, 3sc) x6 [30]
Round 6 :
R6: (inc, 4sc) x6 [36]
Round 7 :
R7: (inc, 5sc) x6 [42]
Round 8 :
R8: (inc, 6sc) x6 [48]
Round 9-17 :
R9-R17: sc around (9 rounds) [48]
Round 18 :
R18: (dec, 6sc) x6 [42]
Round 19 :
R19: (dec, 5sc) x6 [36]
Round 20 :
R20: (dec, 4sc) x6 [30]
Info :
Insert the eyes (I inserted it between round 16 and 17, and about 10 sts in between), snap the washer in and stuff firmly.
Round 21 :
R21: (dec, 3sc) x6 [24]
Round 22 :
R22: (dec, 2sc) x6 [18]
Round 23 :
R23: Slst, fasten off, weave the tail in, add more stuffing if needed.
— Collar :
Left collar :
(red) Left collar: ch 4, (starting from 2nd ch from hook) 2sc, slst [3]
Right collar :
Right collar: ch 4, (starting from 2nd ch from hook) slst, 2sc [3]
Info :
Fasten off and leave a tail for sewing, or not leaving a tail and just glue them later.
— Body :
Round 1 :
(red, beige) R1: (in red) 6sc in magic ring [6]
Round 3 :
R3: (inc, sc) x6 [18]
Round 4 :
R4: (inc, 2sc) x6 [24]
Round 5-9 :
R5-R9: sc around (5 rounds) [24]
Round 10 :
R10: (dec, 2sc) x2, dec, sc, (change to beige) sc, (change to red) (dec, 2sc) x3 [18]
Round 11 :
R11: 8sc, (change to beige) 2sc, (change to red) 8sc [18]
Info :
Slst, fasten off, leave a tail for sewing and stuff fully.
— Legs (make 2) :
Round 1 :
(tan/light brown, brown, blue) R1: (in tan) 6sc in magic ring [6]
Round 3 :
R3: (change to brown) BLO, sc around [12]
Round 4 :
R4: FLO, sc around [12]
Info :
Flip the upper part inside out to make it easier to work with (so the back loops will show up), you'll flip it back again after you finish the piece.
Round 5 :
R5: (crochet into the back loops of R3) (change to blue) 5sc, sk 1 st, 5sc, sk 1 st [10]
Round 6-7 :
R6-R7: sc around (2 rounds) [10]
Round 8 :
R8: (dec, 3sc) x2 [8]
Info :
Slst, fasten off, leave a tail for sewing and stuff firmly.
— Uniform :
Round 1 :
(blue) R1: 6sc in magic ring [6]
Round 3 :
R3: (inc, sc) x6 [18]
Round 4 :
R4: (inc, 2sc) x6 [24]
Round 5 :
R5: (inc, 11sc) x2 [26]
Round 6-8 :
R6-R8: sc around (3 rounds) [26]
Info :
Now we're making the back "flap". Continue and work in rows. Ch 1 to start off.
Round 9 :
R9: 8sc, ch 1 and turn [8]
Round 10 :
R10: sc, sk 1 st, 4sc, sk 1 st, sc [6]
Info :
Cut the yarn and fasten off.
Info :
Now we're making the front "flap". Skip 5 sts from the left side of the back "flap" (see picture). Repeat the "back" flap pattern for the front "flap". Fasten off. Weave in/seal off the tails.
— Pocket :
Pocket :
(blue) Ch 5, (starting from 2nd ch from hook) sc, 2dc, sc [4] Fasten off and leave a tail for sewing, or not leaving a tail and just glue them later.
— Straps (make 2) :
Straps :
(blue) Ch 14, (starting from 2nd ch from hook) 13slst [13] Fasten off and leave a tail for sewing, or not leaving a tail and just glue them later.
— Buttons (make 2) :
Buttons :
(bronze) Ch 3, (starting from 3rd ch from hook) hdc [1] Fasten off and seal off the tails.
— Arms (make 2) :
Round 1 :
(white, red) R1: (in white) 4sc in magic ring [4]
Round 3 :
R3: sc around [8]
Round 4 :
R4: FLO, sc around [8]
Info :
Flip the upper part inside out to make it easier to work with (so the back loops will show up), you'll flip it back again after you finish the piece.
Round 5 :
R5: (crochet into the back loops of R3) (change to red) sc around [8]
Round 6-9 :
R6-R9: sc around (4 rounds) [8]
Info :
Slst, fasten off, leave a tail for sewing and stuff lightly.
— Sideburns (make 2) :
Sideburns :
(dark brown) Ch 7, (starting from 2nd ch from hook) slst, 3sc, 2hdc [6] Fasten off and leave a tail for sewing, or not leaving a tail and just glue them later.
— Eyebrows (make 2) :
Eyebrows :
(dark brown) Ch 5, (starting from 2nd ch from hook) slst, 2sc, slst [4] Fasten off and leave a tail for sewing, or not leaving a tail and just glue them later.
— Moustache :
Moustache :
(dark brown) Ch 10, (starting from 2nd ch from hook) slst, hdc inc, slst, (dc inc, slst) x2, hdc inc, slst [13] Fasten off and leave a tail for sewing, or not leaving a tail and just glue them later.
— Hair Base :
Round 1 :
(dark brown) R1: 6sc in magic ring [6]
Round 3 :
R3: (inc, sc) x6 [18]
Round 4 :
R4: (inc, 2sc) x6 [24]
Round 5 :
R5: (inc, 3sc) x6 [30]
Round 6 :
R6: (inc, 4sc) x6 [36]
Round 7 :
R7: (inc, 5sc) x6 [42]
Round 8 :
R8: (inc, 6sc) x6 [48]
Round 9-17 :
R9-R17: sc around (9 rounds) [48]
Info :
Slst, fasten off and leave a long tail for sewing.
— Nose :
Round 1 :
(beige) R1: 5sc in magic ring [5]
Round 3 :
R3: sc around [10]
Info :
Slst, fasten off, leave a long tail for sewing and stuff lightly.
— Ears (make 2) :
Ears :
(beige) Ch 5, (starting from 2nd ch from hook) slst, 2dc, slst [4] Fasten off and leave a tail for sewing.
— Cap (red) :
Round 1 :
R1: 6sc in magic ring [6]
Round 3 :
R3: (inc, sc) x6 [18]
Round 4 :
R4: (2sc, inc) x6 [24]
Round 5 :
R5: (inc, 3sc) x6 [30]
Round 6 :
R6: (4sc, inc) x6 [36]
Round 7 :
R7: (inc, 5sc) x6 [42]
Round 8 :
R8: (6sc, inc) x6 [48]
Round 9 :
R9: (inc, 7sc) x6 [54]
Round 10 :
R10: (8sc, inc) x6 [60]
Round 11 :
R11: (inc, 9sc) x6 [66]
Round 12-15 :
R12-R15: sc around (4 rounds) [66]
Round 16 :
R16: (dec, 9sc) x6 [60]
Round 17 :
R17: sc around [60]
Round 18 :
R18: (8sc, dec) x6 [54]
Info :
Cut off yarn and fasten off. Skip 18sts from the stitch you fastened off (see picture). Work FRONT loops only. Start off by chain 1.
Round 19 :
R19: FLO, slst, sc, hdc, dc, htc, tc inc, 6tc, tc inc, htc, dc, hdc, sc, slst [20]
Info :
Weave in/seal off all the tails.
Details :
Now we're going to make the details: 1) R1: (in white) 5sc in magic ring [5] R2: inc x5 [10] R3: (inc, sc) x5 [15] Slst, fasten off and leave a tail for sewing, or not leaving a tail and just glue them later. 2) Using red yarn, embroider "M" letter like so: 3) Attach it in the centre of the cap.
— Assembly :
Info :
I recommend to use ball point pins for assembly. This way will help you to keep the pieces in place and make it easier to do the sewing. I'm using a hot glue gun to attach some of the parts, but if you make this amigurumi for kids, I recommend to make it fully sewn.
Step 1 :
1. Sew the body to the head.
Step 2 :
2. Sew the hair base to the head diagonally like so:
Step 3 :
3. Sew the left and right collar outlining the beige area on the body like so:
Step 4 :
4. Attach the uniform to the body. Make sure the front and back "flaps" are in the centre.
Step 5 :
5. Sew the legs to the lower part of the body, approximately on R4-R7 of the uniform, and about 4sts in between.
Step 6 :
6. This step is optional, I inserted a wire through the upper part of the body for the arms. (Not recommended if you make this amigurumi for kids)
Step 7 :
7. Sew the arms to the sides of the upper body.
Step 8 :
8. Attach the pocket to the centre of the uniform.
Step 9 :
9. Attach both straps from the front flap, to the shoulders then to the back flap.
Step 10 :
10. Attach the buttons on the left and right side of the front flap, in front of the straps.
Step 11 :
11. Sew the ears to the sides of the face, approximately 5sts away from the eyes, and in the same level of the eyes.
Step 12 :
12. Place the moustache slightly under the eyes. Don't attach it yet. (more on the next page)
Step 13 :
13. Sew the nose in the space between the eyes, in front of the moustache. Then, sew/glue only the upper part of the moustache (leave the lower part hanging).
Step 14 :
14. Attach the eyebrows above the eyes like so.
Step 15 :
15. Attach the sideburns in front of the ears and slightly upper.
Step 16 :
16. Using light blue yarn, embroider a line surrounding the outside half of both eyes like so. Then apply peach/pink eyeshadow/real blush for the cheeks (optional).
Step 17 :
17. Insert the cap to the head.
Info :
And.. You're done making Mario! Moving on to Luigi!
— Luigi Pattern :
Info :
For Luigi's pattern, follow Mario's pattern, but: 1) Change red to green (body, collar, arms). 2) Change brown to dark brown (legs). 3) Change blue to navy blue (uniform, straps, pocket) 4) For the head, cap, hair base and moustache, use different pattern that are provided after this. 5) For the assembly, follow exactly Mario's assembly.
— Luigi Head :
HEAD :
(beige) R1: 6sc in magic ring [6]
Round 3 :
R3: (inc, sc) x6 [18]
Round 4 :
R4: (inc, 2sc) x6 [24]
Round 5 :
R5: (inc, 3sc) x6 [30]
Round 6 :
R6: (inc, 4sc) x6 [36]
Round 7 :
R7: (inc, 5sc) x6 [42]
Round 8 :
R8: (inc, 13sc) x3 [45]
Round 9-19 :
R9-R19: sc around (11 rounds) [45]
Round 20 :
R20: (dec, 13sc) x3 [42]
Round 21 :
R21: (dec, 5sc) x6 [36]
Round 22 :
R22: (dec, 4sc) x6 [30]
Info :
Insert the eyes (I inserted it between round 17 and 18, and about 9 sts in between), snap the washer in and stuff firmly.
Round 23 :
R23: (dec, 3sc) x6 [24]
Round 24 :
R24: (dec, 2sc) x6 [18]
Info :
Slst, fasten off, weave the tail in, add more stuffing if needed.
— Luigi Hair Base :
Round 1 :
(dark brown) R1: Ch 7, (starting from 2nd ch from hook) 6sc. Turn and make 6sc again on the loops of other side of the chains. Now you're working in rounds. [12]
Round 2 :
R2: (inc, sc) x6 [18]
Round 3 :
R3: (inc, 2sc) x6 [24]
Round 4 :
R4: (inc, 3sc) x6 [30]
Round 5 :
R5: (inc, 4sc) x6 [36]
Round 6 :
R6: (inc, 5sc) x6 [42]
Round 7 :
R7: (inc, 6sc) x6 [48]
Round 8-11 :
R8-R11: sc around (4 rounds) [48]
Round 12 :
R12: (inc, 15sc) x3 [51]
Round 13-16 :
R13-R16: sc around (4 rounds) [51]
Info :
Slst, fasten off and leave a long tail for sewing.
— Luigi Cap (green) :
Round 1 :
R1: 6sc in magic ring [6]
Round 3 :
R3: (inc, sc) x6 [18]
Round 4 :
R4: (2sc, inc) x6 [24]
Round 5 :
R5: (inc, 3sc) x6 [30]
Round 6 :
R6: (4sc, inc) x6 [36]
Round 7 :
R7: (inc, 5sc) x6 [42]
Round 8 :
R8: (6sc, inc) x6 [48]
Round 9 :
R9: (inc, 7sc) x6 [54]
Round 10 :
R10: (8sc, inc) x6 [60]
Round 11 :
R11: (inc, 19sc) x3 [63]
Round 12-15 :
R12-R15: sc around (4 rounds) [63]
Round 16 :
R16: (dec, 19sc) x3 [60]
Round 17 :
R17: (18sc, dec) x3 [57]
Round 18 :
R18: dec, 8sc, dec, 7sc, dec, 8sc, dec, 7sc [51]
Info :
Cut off yarn and fasten off. Skip 17sts from the stitch you fastened off. Start off by chain 1. Work FRONT loops only.
Round 19 :
R19: FLO, slst, sc, hdc, dc, htc, tc inc, 5tc, tc inc, htc, dc, hdc, sc, slst [19]
Info :
Weave in/seal off all the tails.
— Pipe Pattern :
Intro :
We're making the pipe in a continuous piece. (terracotta, light green, green)
Round 1 :
(in terracotta) R1: 6sc in magic ring [6]
Round 3 :
R3: (inc, sc) x6 [18]
Round 4 :
R4: (2sc, inc) x6 [24]
Round 5 :
R5: (inc, 3sc) x6 [30]
Round 6 :
R6: (4sc, inc) x6 [36]
Round 7 :
R7: (inc, 5sc) x6 [42]
Round 8 :
R8: (6sc, inc) x6 [48]
Round 9 :
R9: (inc, 7sc) x6 [54]
Round 10 :
R10: (8sc, inc) x6 [60]
Round 11 :
R11: (inc, 9sc) x6 [66]
Round 12 :
R12: BLO, sc around [66]
Round 13 :
R13: sc around [66]
Round 14 :
R14: FLO, sc around [66]
Info :
Flip the upper part inside out to make it easier to work with (so the back loops will show up), you'll flip it back again later.
Round 15 :
R15: (crochet into the back loops of R13) (change to light green) (dec, 9sc) x6 [60]
Round 16-24 :
R16-R24: sc around (9 rounds) [60]
Round 25 :
R25: FLO, (inc, 9sc) x6 [66]
Round 26 :
R26: (10sc, inc) x6 [72]
Round 27 :
R27: BLO, sc around [72]
Round 28-31 :
R28-R31: sc around (4 rounds) [72]
Info :
Fold the piece everytime there's a line of loops forming a horizontal line appearing from the FLO/BLO (see picture).
Round 32 :
R32: BLO, (dec, 10sc) x6 [66]
Round 33 :
R33: (9sc, dec) x6 [60]
Info :
Now we're making the inner part of the pipe.
Round 34 :
R34: (change to green) BLO, (dec, 18sc) x3 [57]
Round 35-43 :
R35-R43: sc around (9 rounds) [57]
Round 44 :
R44: FLO, (17sc, dec) x3 [54]
Round 45 :
R45: (dec, 7sc) x6 [48]
Round 46 :
R46: (6sc, dec) x6 [42]
Round 47 :
R47: (dec, 5sc) x6 [36]
Info :
Insert stuffing. I inserted popcorn kernels to make it heavy (optional), so the pipe won't fall. Still, insert stuffing for the remaining space.
Round 48 :
R48: (4sc, dec) x6 [30]
Round 49 :
R49: (dec, 3sc) x6 [24]
Round 50 :
R50: (2sc, dec) x6 [18]
Round 51 :
R51: (dec, sc) x6 [12]
Round 52 :
R52: dec x6 [6]
Info :
Finish off and weave the tail in.
Additional steps :
1) Your pipe is looking like this. 2) Insert the darker green coloured piece inside. 3) Push it and shape it inside the inner pipe. Make it neat. 4) Don't forget the outer part, shape the edges and make it neat. 5) You're done making pipe 1. 6) Make pipe 2. Follow pipe 1's pattern, but double the height: From R16, instead of sc around for 9 rounds, you sc around for 18 rounds.
— Bonus Pattern!!! Mushrooms :
HEAD :
(red/green) R1: 6sc in magic ring [6]
Round 3 :
R3: (inc, sc) x6 [18]
Round 4 :
R4: (2sc, inc) x6 [24]
Round 5 :
R5: (inc, 7sc) x3 [27]
Round 6 :
R6: (inc, 8sc) x3 [30]
Round 7 :
R7: (4sc, inc) x6 [36]
Round 8-10 :
R8-R10: sc around (3 rounds) [36]
Round 11 :
R11: (inc, 5sc) x6 [42]
Round 12 :
R12: (dec, 5sc) x6 [36]
Round 13 :
R13: (4sc, dec) x6 [30]
Round 14 :
R14: (dec, 3sc) x6 [24]
Info :
Slst, fasten off, leave a tail for sewing and stuff fully.
— Mushroom Body :
BODY :
(beige) R1: 6sc in magic ring [6]
Round 3 :
R3: (inc, sc) x6 [18]
Round 4 :
R4: (inc, 5sc) x3 [21]
Round 5-8 :
R5-R8: sc around (4 rounds) [21]
Info :
Slst, fasten off, hide the tail later (inside the head), and stuff fully. Insert safety eyes on R5-R6, 4sts in between.
— Dots (make 5) :
Dots :
(white) R1: 4sc in magic ring [4] R2: inc x4 [8] R3: (inc, sc) x4 [12] R4: (inc, 2sc) x4 [16] Fasten off and leave a tail for sewing, or not leaving a tail and just glue them later.
— Mushroom Assembly :
Assembly :
1) Insert the body to the head, place the head diagonally like so, then sew them in place using the head's tail. 2) Attach one dot on the top of the head. 3) Attach 2 dots on the front and back side of the head. 4) Attach 2 dots on the left and right side of the head. 5) (Optional) Apply light blush on the cheeks. 6) Make the other colour!
This Mario and Luigi set brings playful nostalgia to your crochet collection, perfect for gifting or display. Make the pipes and mushrooms to create a cute, collectible scene that kids and gamers will adore. Enjoy every stitch and share your finished plumbers with pride. 🧶✨
